Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Here the list of tool is given that is needed to perform the operation perfectly: Wire cutter/stripper Crimp connectors suitable for 6-gauge wire Crimping tool Heat shrink tubing (large enough for the wire gauge) Heat gun.

Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. It is very important to pick up the right equipment for splicing a 6 gauge wire.

Not for consumer sale or use.ģM industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Contact customer service at 80 to request a certificate. Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Some products contain imported components. Other methods of connection may not offer the same level of protection.The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Remember, Butt splices are useful for their rapid installation and durability. /rebates/2fp2fPolaris-600-MCM-6-AWG-Bagged-Insulated-In-Line-Splice-Black-ISR-600B2f303578411&. After crimping, perform the tug test to make sure the wires don't pull out. We'll repeat the process on the other side with a larger wire. This crimp bends the connector around the wire which creates a solid connection. Now, the splice is crimped with the proper tool. Insert the wire making sure the insulation touches the butt splice, otherwise you run the risk of a weaker connection. Make sure your wires butt up against that. If you look inside the butt splice you will see an indentation. The first step is to make sure you have correctly stripped the wires to the proper length. 33-inch diameter heavy wall polyolefin heat shrink tubing with a watertight adhesive lining.

The kit includes a set screw splice connector and one 8-inch x. The kit is designed for UF cables minimum 14/3, 12/2 and maximum 8/3. So, you could use step down tinned butt splices to connect a 10 gauge wire to a 14 AWG wire, or connect a 14 AWG wire to two 14 gauge wires. /rebates/2fp2fNSi-Industries-250-MCM-6-AWG-Insulated-In-Line-Splice-Black-ISR-2502f300734589&. The Gardner Bender Underground Cable Splice Kit gives you complete waterproof installation for UF cable. TKDMR 10pcs 6 AWG-5/16' Battery Lugs,with 10pcs 3:1 Heat Shrink Tubing,Battery Cable Ends,Heavy Duty Copper Wire Lugs,Tubular Ring Terminals,AWG Crimp Wire Ring Lugs,Battery Terminal Connectors. Step down tinned butt splices are used to connect different gauge wires together or multiple wires of the same size. This item: Dorman 85261 Butt Connectors - 6 Gauge, 2 Pack Universal Fit.

6 wire splice connector